bdf_sets
Module¶
All set cards are defined in this file. This includes:
- sets * SET1, SET3, RADSET # ??? RADSET
- asets - aset, aset1
- omits - omit, omit1
- bsets - bset, bset1
- csets - cset, cset1
- qsets - qset, qset1
- usets - uset, uset1 # USET 1 is not supported
The superelement sets start with SE: * se_bsets - sebset, sebset1 * se_csets - secset, secset1 * se_qsets - seqset, seqset1 * se_usets - seuset, seuset1 *se_sets
- SESET
- SEQSEP
#* Set #* SetSuper
Entry Type | Equivalent Type |
---|---|
SEQSETi | QSETi |
SESUP | SUPORT |
SECSETi | CSETi |
SEBSETi | BSETi |
-
class
pyNastran.bdf.cards.bdf_sets.
ABCQSet
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Generic Class ASET, BSET, CSET, QSET cards inherit from.
Defines degrees-of-freedom in the analysis set (A-set)
1 2 3 4 5 6 7 8 9 ASET ID1 C1 ID2 C2 ID3 C3 ID4 C4 ASET 16 2 23 3516 1 4 -
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
ids
= None¶ Identifiers of grids points. (Integer > 0)
-
node_ids
¶
-
type
= 'ABCQSet'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
ABQSet1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Generic Class ASET1, BSET1, QSET1 cards inherit from.
Defines degrees-of-freedom in the analysis set (a-set).
1 2 3 4 5 6 7 8 9 xSET1 C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 xSET1 C ID1 THRU ID2 -
components
= None¶ Component number. (Integer zero or blank for scalar points or any unique combination of the Integers 1 through 6 for grid points with no embedded blanks.)
-
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
ids
= None¶ Identifiers of grids points. (Integer > 0)
-
node_ids
¶
-
type
= 'ABQSet1'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
ASET
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABCQSet
Defines degrees-of-freedom in the analysis set (A-set).
1 2 3 4 5 6 7 8 9 ASET ID1 C1 ID2 C2 ID3 C3 ID4 C4 ASET 16 2 23 3516 1 4 Creates an ASET card, which defines the degree of freedoms that will be retained during an ASET modal reduction.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms to be retained (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
- ..note :: the length of components and ids must be the same
-
_properties
= ['node_ids']¶
-
type
= 'ASET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
ASET1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Defines degrees-of-freedom in the analysis set (a-set)
1 2 3 4 5 6 7 8 9 ASET1 C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 ASET1 C ID1 THRU ID2 Creates an ASET1 card, which defines the degree of freedoms that will be retained during an ASET modal reduction.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms to be retained (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
type
= 'ASET1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
BSET
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABCQSet
Defines analysis set (a-set) degrees-of-freedom to be fixed (b-set) during generalized dynamic reduction or component mode synthesis calculations.
1 2 3 4 5 6 7 8 9 BSET ID1 C1 ID2 C2 ID3 C3 ID4 C4 BSET 16 2 23 3516 1 4 Creates an BSET card, which defines the degree of freedoms that will be fixed during a generalized dynamic reduction or component model synthesis calculation.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms to be fixed (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
- ..note :: the length of components and ids must be the same
-
_properties
= ['node_ids']¶
-
type
= 'BSET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
BSET1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Defines analysis set (a-set) degrees-of-freedom to be fixed (b-set) during generalized dynamic reduction or component mode synthesis calculations.
1 2 3 4 5 6 7 8 9 BSET1 C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 BSET1 C ID1 THRU ID2 Creates an BSET1 card, which defines the degree of freedoms that will be fixed during a generalized dynamic reduction or component model synthesis calculation.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms to be fixed (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
type
= 'BSET1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
CSET
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABCQSet
Defines the degree of freedoms that will be free during a generalized dynamic reduction or component model synthesis calculation.
1 2 3 4 5 6 7 8 9 CSET ID1 C1 ID2 C2 ID3 C3 ID4 C4 CSET 16 2 23 3516 1 4 Creates an CSET card, which defines the degree of freedoms that will be free during a generalized dynamic reduction or component model synthesis calculation.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms to be free (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
- ..note :: the length of components and ids must be the same
-
_properties
= ['node_ids']¶
-
type
= 'CSET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
CSET1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Defines the degree of freedoms that will be free during a generalized dynamic reduction or component model synthesis calculation.
1 2 3 4 5 6 7 8 9 CSET1 C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 CSET1 C ID1 THRU ID2 CSET1 ,, ALL Creates an CSET1 card, which defines the degree of freedoms that will be free during a generalized dynamic reduction or component model synthesis calculation.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms to be free (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
classmethod
add_card
(card, comment='')[source]¶ Adds a CSET1 card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
ids
= None¶ Identifiers of grids points. (Integer > 0)
-
node_ids
¶
-
type
= 'CSET1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
OMIT
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABCQSet
Defines analysis set (a-set) degrees-of-freedom to be fixed (b-set) during generalized dynamic reduction or component mode synthesis calculations.
1 2 3 4 5 6 7 8 9 OMIT ID1 C1 ID2 C2 ID3 C3 ID4 C4 OMIT 16 2 23 3516 1 4 Creates an BSET card, which defines the degree of freedoms that will be fixed during a generalized dynamic reduction or component model synthesis calculation.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms to be fixed (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
- ..note :: the length of components and ids must be the same
-
_properties
= ['node_ids']¶
-
type
= 'OMIT'¶
-
class
pyNastran.bdf.cards.bdf_sets.
OMIT1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Defines degrees-of-freedom to be excluded (o-set) from the analysis set (a-set).
1 2 3 4 5 6 7 8 9 OMIT C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 ID9 OMIT1 C ID1 THRU ID2 Creates an OMIT1 card, which defines the degree of freedoms that will be excluded (o-set) from the analysis set (a-set).
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms to be omitted (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
type
= 'OMIT1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
QSET
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABCQSet
Defines generalized degrees-of-freedom (q-set) to be used for dynamic reduction or component mode synthesis.
1 2 3 4 5 6 7 8 9 QSET ID1 C1 ID2 C2 ID3 C3 ID4 C4 QSET 16 2 23 3516 1 4 Creates a QSET card, which defines generalized degrees of freedom (q-set) to be used for dynamic reduction or component mode synthesis.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms to be created (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
type
= 'QSET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
QSET1
(ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Defines generalized degrees-of-freedom (q-set) to be used for dynamic reduction or component mode synthesis.
Creates a QSET1 card, which defines generalized degrees of freedom (q-set) to be used for dynamic reduction or component mode synthesis.
Parameters: - ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms to be created (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
type
= 'QSET1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
RADSET
(cavities, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Specifies which radiation cavities are to be included for radiation enclosure analysis.
1 2 3 4 5 6 7 8 9 RADSET ICAVITY1 ICAVITY2 ICAVITY3 ICAVITY4 ICAVITY5 ICAVITY6 ICAVITY7 ICAVITY8 ICAVITY9 RADSET 1 2 3 4 Creates a RADSET card
Parameters: - cavities : List[int]
the RADCAV ids
- comment : str; default=’‘
a comment for the card
-
classmethod
add_card
(card, comment='')[source]¶ Adds a USET1 card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
type
= 'RADSET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
SEBSET
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABCQSet
Defines boundary degrees-of-freedom to be fixed (b-set) during generalized dynamic reduction or component mode calculations.
1 2 3 4 5 6 7 8 SEBSET SEID ID1 C1 ID2 C2 ID3 C3 SEBSET C ID1 THRU ID2 -
_properties
= ['node_ids']¶
-
type
= 'SEBSET'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SEBSET1
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABQSet1
Defines boundary degrees-of-freedom to be fixed (b-set) during generalized dynamic reduction or component mode synthesis calculations.
1 2 3 4 5 6 7 8 9 SEBSET1 SEID C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID9 SEBSET1 SEID C ID1 THRU ID2 -
_properties
= ['node_ids']¶
-
type
= 'SEBSET1'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SECSET
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABCQSet
-
_properties
= ['node_ids']¶
-
type
= 'SECSET'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SECSET1
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABQSet1
Defines SECSET1
1 2 3 4 5 6 7 8 9 SECSET1 SEID C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID9 SECSET1 SEID C ID1 THRU ID2 -
_properties
= ['node_ids']¶
-
type
= 'SECSET1'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SEQSEP
(ssid, psid, ids, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SetSuper
Used with the CSUPER entry to define the correspondence of the exterior grid points between an identical or mirror-image superelement and its primary superelement.
-
classmethod
add_card
(card, comment='')[source]¶ Adds a SEQSEP card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
ids
= None¶ Exterior grid point identification numbers for the primary superelement. (Integer > 0)
-
psid
= None¶ Identification number for the primary superelement. (Integer >= 0).
-
ssid
= None¶ Identification number for secondary superelement. (Integer >= 0).
-
type
= 'SEQSEP'¶
-
classmethod
-
class
pyNastran.bdf.cards.bdf_sets.
SEQSET
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABCQSet
-
_properties
= ['node_ids']¶
-
type
= 'SEQSET'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SEQSET1
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SuperABQSet1
-
_properties
= ['node_ids']¶
-
type
= 'SEQSET1'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SESET
(seid, ids, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.SetSuper
Defines interior grid points for a superelement.
-
classmethod
add_card
(card, comment='')[source]¶ Adds a SESET card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
ids
= None¶ Grid or scalar point identification number. (0 < Integer < 1000000; G1 < G2)
-
type
= 'SESET'¶
-
classmethod
-
class
pyNastran.bdf.cards.bdf_sets.
SET1
(sid, ids, is_skin=False, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Defines a list of structural grid points or element identification numbers.
1 2 3 4 5 6 7 8 9 SET1 SID ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 etc. SET1 3 31 62 93 124 16 17 18 19 SET1 6 29 32 THRU 50 61 THRU 70 17 57 Creates a SET1 card, which defines a list of structural grid points or element identification numbers.
Parameters: - sid : int
set id
- ids : List[int, str]
AECOMP, SPLINEx, PANEL : all grid points must exist XYOUTPUT : missing grid points are ignored The only valid string is THRU
ids = [1, 3, 5, THRU, 10]
- is_skin : bool; default=False
if is_skin is used; ids must be empty
- comment : str; default=’‘
a comment for the card
-
classmethod
add_card
(card, comment='')[source]¶ Adds a SET1 card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
cross_reference_set
(self, model, xref_type, msg='', allow_empty_nodes=False)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
- xref_type : str
{‘Node’, ‘Point’}
- allow_empty_nodes : bool; default=False
do all nodes need to exist?
- SPLINEx, ACMODL, PANEL, AECOMP, XYOUTPUT
- - nodes
- SPLINEx (all nodes must exist)
- PANEL (all nodes must exist)
- XYOUTPUT (missing nodes ignored)
- AECOMP
- ACMODL (optional)
- - elements
- ACMODL (optional)
-
ids
= None¶ List of structural grid point or element identification numbers. (Integer > 0 or ‘THRU’; for the ‘THRU’ option, ID1 < ID2 or ‘SKIN’; in field 3)
-
safe_cross_reference
(self, model, xref_type, msg='', allow_empty_nodes=False)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
- xref_type : str
{‘Node’}
- allow_empty_nodes : bool; default=False
do all nodes need to exist?
- SPLINEx, ACMODL, PANEL, AECOMP, XYOUTPUT
- - nodes
- SPLINEx (all nodes must exist)
- PANEL (all nodes must exist)
- XYOUTPUT (missing nodes ignored)
- AECOMP
- ACMODL (optional)
- - elements
- ACMODL (optional)
-
sid
= None¶ Unique identification number. (Integer > 0)
-
type
= 'SET1'¶
-
class
pyNastran.bdf.cards.bdf_sets.
SET3
(sid, desc, ids, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Defines a list of grids, elements or points.
SET3 entries are referenced by: - NX
- ACMODL
- PANEL
MSC - PBMSECT - PBRSECT - RFORCE
- ELEM only (SOL 600)
DEACTEL - ELEM only (SOL 400)
RBAR, RBAR1, RBE1, RBE2, RBE2GS, RBE3, RROD, RSPLINE, RSSCON, RTRPLT and RTRPLT1
- RBEin / RBEex only
- ELSIDi / XELSIDi
- ELEM only
- NDSIDi
- GRID only
1 2 3 4 5 6 7 8 9 SET3 SID DES ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 etc SET3 1 POINT 11 12 -
classmethod
add_card
(card, comment='')[source]¶ Adds a SET3 card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
ids
= None¶ Identifiers of grids points, elements, points or properties. (Integer > 0)
-
sid
= None¶ Unique identification number. (Integer > 0)
-
type
= 'SET3'¶
-
valid_descs
= ['GRID', 'POINT', 'ELEMENT', 'PROP', 'RBEIN', 'RBEEX']¶
-
class
pyNastran.bdf.cards.bdf_sets.
Set
[source]¶ Bases:
pyNastran.bdf.cards.base_card.BaseCard
Generic Class all SETx cards inherit from
-
ids
= None¶ list of IDs in the SETx
-
-
class
pyNastran.bdf.cards.bdf_sets.
SetSuper
[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Generic Class all Superelement SETx cards inherit from.
-
ids
= None¶ list of IDs in the SESETx
-
seid
= None¶ Superelement identification number. Must be a primary superelement. (Integer >= 0)
-
-
class
pyNastran.bdf.cards.bdf_sets.
SuperABCQSet
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Generic Class ASET, BSET, CSET, QSET cards inherit from.
Defines degrees-of-freedom in the analysis set (A-set)
1 2 3 4 5 6 7 8 9 SEBSET SEID ID1 C1 ID2 C2 ID3 C3 SEBSET 100 16 2 23 3516 1 4 -
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
ids
= None¶ Identifiers of grids points. (Integer > 0)
-
node_ids
¶
-
type
= 'SuperABCQSet'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
SuperABQSet1
(seid, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Generic Class SEBSET1, SEQSET1 cards inherit from.
Defines degrees-of-freedom in the analysis set (a-set).
1 2 3 4 5 6 7 8 9 SEBSET1 SEID C ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID9 SEBSET1 SEID C ID1 THRU ID2 -
components
= None¶ Component number. (Integer zero or blank for scalar points or any unique combination of the Integers 1 through 6 for grid points with no embedded blanks.)
-
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
ids
= None¶ Identifiers of grids points. (Integer > 0)
-
node_ids
¶
-
type
= 'SuperABQSet1'¶
-
-
class
pyNastran.bdf.cards.bdf_sets.
USET
(name, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.Set
Defines a degrees-of-freedom set.
1 2 3 4 5 6 7 8 USET SNAME ID1 C1 ID2 C2 ID3 C3 USET JUNK ID1 THRU ID2 Creates a USET card, which defines a degrees-of-freedom set.
Parameters: - name : str
SNAME Set name. (One to four characters or the word ‘ZERO’ followed by the set name.)
- ids : List[int]
the GRID/SPOINT ids
- components : List[str]
the degree of freedoms (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
classmethod
add_card
(card, comment='')[source]¶ Adds a USET card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
components
= None¶ Identifiers of grids points. (Integer > 0)
-
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
node_ids
¶
-
type
= 'USET'¶
-
class
pyNastran.bdf.cards.bdf_sets.
USET1
(name, ids, components, comment='')[source]¶ Bases:
pyNastran.bdf.cards.bdf_sets.ABQSet1
Defines a degree-of-freedom set.
1 2 3 4 5 6 7 8 9 USET1 SNAME C ID2 ID3 ID4 ID5 ID6 ID7 ID9 USET1 SNAME C ID1 THRU ID2 Creates a USET1 card, which defines a degrees-of-freedom set.
Parameters: - name : str
SNAME Set name. (One to four characters or the word ‘ZERO’ followed by the set name.)
- ids : List[int]
the GRID/SPOINT ids
- components : str
the degree of freedoms (e.g., ‘1’, ‘123’)
- comment : str; default=’‘
a comment for the card
-
_properties
= ['node_ids']¶
-
classmethod
add_card
(card, comment='')[source]¶ Adds a USET1 card from
BDF.add_card(...)
Parameters: - card : BDFCard()
a BDFCard object
- comment : str; default=’‘
a comment for the card
-
cross_reference
(self, model)[source]¶ Cross links the card so referenced cards can be extracted directly
Parameters: - model : BDF()
the BDF object
-
node_ids
¶
-
type
= 'USET1'¶